Reasons the Remington 700 Remains the Best Bolt Gun

Reasons the Remington 700 Remains the Best Bolt Gun

While this might not be the most smooth-sailing time for Remington, there’s a reason why it has remained one of the country’s greatest rifles. A number of things have to be met in order for a rifle to be regarded as one of the best. Whether its accuracy, safety reliability, or availability, there is a reason that certain rifles are above the rest. Below we list down some of the reasons that Remington 700 has remained one of the top players out there today.


For marksmen, accuracy would have to be one of the top factors they will consider when buying a rifle. You need a rifle that will not just shoot straight but will also shoot straight too. It doesn’t matter if you‘re aiming for a target a hundred yards away or you’re aiming to shoot at a target right on the next ridge. A shooter wants assurance that his weapon will make the shot every time.

Accuracy commences with the Remington 700’s receiver. It’s easy to take for granted the rifle’s cylindrical action but its introduction has actually paved the way for the long-range weapons that are prevalently used today. Thanks to the 700’s cylindrical action, it gives more stock attachment which leads to a system that is more rigid. This results in lower chances of bullet diversion as it traverses through the barrel. This feature ensures that every shot will be right on top of the previous one.

Another contributor to the 700’s accuracy is the trigger. On average, 700 triggers break at 3 pounds, along with an over-travel that’s nearly imperceptible. This makes it quite exceptional, especially when compared with other systems. Other rifles that belong in the same price range offer triggers that are heavy and don’t have a clear break. Many also suffer from over-travel that is a bit on the spongy side. When the break isn’t as clear or crisp, pulling a shot becomes easier— a devastating reality hunters and even deadly in the case of military personnel.


You don’t want a rifle that can only fire once. Sure, that very first shot might be more than enough to bring down a trophy, but in those cases when a single shot isn’t just enough or in those instances where a bulls-eye is needed to top a competition, you need your rifle to have your back. Fortunately, the 700 can do exactly that. Clearance is machined into the lock ring and bolt lugs so the action is not going to bind on any errant powder grain, hair or dirt. Some may say that having all these tolerances will sacrifice accuracy in the process, but they do not actually result in leakage. Many rifles may feature tighter actions but they do not, in any way, show proof that such measures have led to better accuracy.

Compared to a number of its predecessor and even current competitors, the 700 is operated via push feed system. This is in contrast with a controlled feed that other rifles are known for. The internal extractor of the 700 is on the same level with various controlled feed extractors. There’s the added bonus that you won’t have to deal with unnecessary jams, especially on short strokes. There’s also the fact that producing them is cost-efficient— shortcomings that are common with a controlled feed system.


The safety features of the 700 are quite impressive, especially when compared with what other rifles offer. This is important, especially if one were to take note of the increased popularity of experimentation and reloading, especially in the firearms community. Other rifles are equipped with firing pin stop tare strengthened to help mitigate possible blowback in the event of a cartridge failure. With Remington, there are three steel rings. The 700 features a deep bold head that is counterbored and nearly encompasses the entire case head. The bolt then connects to a counterbored lock ring, which adds another steel layer around the rifle’s case. The lock ring is set in the barrel recess, which makes up for the third steel layer, standing in the way between a blown case and the shooter. Other rifles merely minimize the risks of shooter injury. The Remington, on the other hand, eliminates it.


There over 40 variants of the 700 and this still doesn’t include caliber and left-handed model options. This ensures that even the most particular buyer can find something attractive out of the lineup that Remington has to offer. Model variations include ornate grades to synthetic-centered designs that are aimed at holding up even against the harshest of environments. What’s even better is that these rifles are available in a variety of calibers.

Can’t find exactly what you’re looking for? The 700 can be customized with a variety of add-ons and a bevy of aftermarket upgrades. You can get the triggers swapped, socks can be interchanged, bolts can be replaced, and even bolt handles can get augmented. There is a smorgasbord of upgrades and augmentations and aftermarket possibilities that makes it easier for the 700 to be easily customized to user needs.

Read More About Remington 700 Rifle Stocks.