Fixing the Remington 700 Trigger Issue - Finding the Right Replacement

Fixing the Remington 700 Trigger Issue— Finding the Right Replacement

Owning one of today’s most renowned rifles brings about incredible advantages. You’ll have a handy rifle that can be expected to get any job done. It’s also comfortable and will be available at a very affordable price— things that will matter most to shooters and will affect their performance, regardless of how experienced they are.

Unfortunately, even the most preferred rifle will have its own set of problems. If the weapon can end up causing accidental shoots, you’d look to the manufacturer to address the problem and offer solutions on how to fix the issue. With the Remington 700, the manufacturer has an impressive fixing process you can refer to.

Fixing the problem

The moment Remington got news of the problem happening with their triggers for their 700 models, they acted decisively and speedily to get it addressed at the soonest possible time. Buyers were treated to a page where they can input all their information and details concerning their problem rifle so they can check if they can get a retrofit.

The issue concerning the trigger has been a prevalent problem for those 700 moles that were manufactured from May of 2006 to April of 2014. All of these problematic rifles are known to be equipped with the X-Mark Pro trigger. It has been admitted by the company that the models suffer from a trigger problem rifle owners were also warned that this particular malfunction can lead to accidental shots and could happen even when the rifle owner isn’t touching the trigger.

If you’re worried that you may own a rifle that is one of the problematic pieces, you’ll want to look closer at its appearance and design and see if it is equipped with the X-Mark Pro. Walker triggers tend to have groves while the X-Mark Pro tends to be smoother. So, distinguishing one from the other should be easy enough to do.

Fixing the triggers

In a bid to fix the problematic triggers that they have produced, Remington gets the problem triggers retrofitted with new and more improved models of the X-Mark Pro. It does get a bit tricky to determine whether you meet the criteria for a retrofitting. There is, however, a website that Remington created to ensure that people can fill out the information about their weapon and its specifications to check whether they are qualified or not.

Once it has been determined that the weapon you own has met all the criteria, you will just need to get the rifle sent back. The manufacturers will then get the new mechanism installed in place of the problematic trigger. They will do this free of charge. Just note that there are models that are considered to be too old for the retrofitting process including the XP-100, 725, 722, 721, 660, and 600. If you own any of these models, instead of retrofitting, you will be provided with product vouchers instead.

Understanding the retrofitting process

When submitting your rifle for retrofitting, it’s important to remember that there are currently 7 and a half million rifles out there that are in need of fixing. This means that it could take a while before your rifle will be returned to you. Once you get the approval, the rifle will need to be taken to the manufacturer or an authorized company to carry out the repairs. Remington will pay for all the necessary expenses. It could take up to 12 weeks to get the firearm fixed, after which it would be sent back to you with the trigger fixed and with no more issues.

Fixing it Yourself

If you wish to get the trigger fixed by yourself, you will need to find a replacement trigger designed for the 700 model. When choosing a trigger, make sure to consider how you expect to use the weapon. Determine whether you’re going to need to use it in rainy or snowy areas. If you expect to use the rifle in rather harsh environments, expect that you will have to compromise some of the weapon’s pull weight for durability.

If you intend to use the rifle for casual shooting and hunting, you need one that will be easily adjusted down to a pull weight of 2.5 lbs to 3 lbs.

Installing the replacement trigger

Start by clearing your rifle. Take the stock and the bolt off and make sure to tap both the rear and front pins. You don’t want to forcefully do this as you wouldn’t want to tap all of the pins forcefully  or the bolt will stop and come out. Once the pins have been removed, just follow the trigger installation process. You’ll need to test the rifle afterwards, to make sure that everything is working that way it should be. It will also be a good chance for you to get a good feel of how the new replacement trigger is so you can get used to it.

Why is the Remington 700 one of the best rifles today?